# # Copyright (c) 2012-2022 Red Hat. # Copyright (c) 2008 Aconex. All Rights Reserved. # Copyright (c) 2000,2003,2004 Silicon Graphics, Inc. All Rights Reserved. # # This program is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by the # Free Software Foundation; either version 2 of the License, or (at your # option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY # or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License # for more details. # # Common gmake macros for building # # src/include/builddefs. Generated from builddefs.in by configure. # ifndef _BUILDDEFS_INCLUDED_ _BUILDDEFS_INCLUDED_ = 1 ifndef _PCP_CONF_INCLUDED_ _PCP_CONF_INCLUDED_ = 1 include $(PCP_DIR)/etc/pcp.conf endif # General package information PACKAGE_VERSION ?= 6.3.7 PACKAGE_MAJOR ?= 6 PACKAGE_MINOR ?= 3 PACKAGE_REVISION ?= 7 PACKAGE_BUILD ?= 1 PACKAGE_NAME ?= pcp PACKAGE_CONFIGURE ?= --with-infiniband=yes --with-python=no --with-dstat-symlink=yes --with-perfevent=yes --with-pmdagfs2=yes --with-pmdastatsd=yes --with-pmdabcc=yes --with-pmdabpf=yes --with-pmdabpftrace=yes --with-pmdajson=yes --with-pmdamongodb=yes --with-pmdamysql=yes --with-pmdanutcracker=no --with-pmdasnmp=yes PACKAGE_DISTRIBUTION ?= redhat SGI_CHROOT_BUILD ?= 0 SGI_ISSP_BUILD ?= 0 # see build/containers/GNUlocalrules and build/containers/*/GNUmakefile CONTAINER_VERSION = $(PACKAGE_VERSION)-$(PACKAGE_BUILD) CONTAINER_ARCH = $(shell uname -p) BUILDRULES = $(PCP_INC_DIR)/buildrules # LCFLAGS, LLDFLAGS, LLDLIBS, LDIRT may be specified in local makefiles. # turn on all warnings by default ifeq "yes" "yes" WARN_OFF = -Wall else WARN_OFF = endif LIBPCP_ABIDIR ?= src PCPLIB_LDFLAGS = -L$(PCP_LIB_DIR) # backward compatibility PCP_LIBS = $(PCPLIB_LDFLAGS) # platform-specific CFLAGS, LDLIBS, and shared library extension # # Note: # Need PCFLAGS setting here to match the CFLAGS settings in # ../../configure.ac (likewise for PLDFLAGS and LDFLAGS). # TARGET_OS = linux CROSS_COMPILING = no CASE_INSENSITIVE_FS = no C99_CFLAGS = --std=c99 PCFLAGS = -fPIC -fno-strict-aliasing -D_GNU_SOURCE -Wshadow -Wno-array-bounds PLDFLAGS = -Wl,-z,relro -Wl,--as-needed -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 ifneq (, $(filter linux kfreebsd gnu, $(TARGET_OS))) DSOSUFFIX = so endif ifeq "$(TARGET_OS)" "darwin" DSOSUFFIX = dylib CASE_INSENSITIVE_FS = yes endif ifeq "$(TARGET_OS)" "mingw" DSOSUFFIX = dll EXECSUFFIX = .exe SHELLSUFFIX = .sh PLDLIBS = -lwsock32 -liphlpapi endif ifeq "$(TARGET_OS)" "solaris" PLDFLAGS += -fPIC PLDLIBS = -lnsl -lsocket -lresolv -ldl -lposix4 DSOSUFFIX = so endif ifeq "$(TARGET_OS)" "aix" DSOSUFFIX = so # -qcpluscmt # allow C++-style // as comment preamble # -brtl # use run-time linker # -bnoipath # do not use path to DSOs from the build, use default search path # rules # (and does not accept -Wall as a valid option) PLDFLAGS += -brtl -bnoipath WARN_OFF = endif ifeq "$(TARGET_OS)" "freebsd" DSOSUFFIX = so endif ifeq "$(TARGET_OS)" "netbsd" DSOSUFFIX = so LDFLAGS += -Wl,-rpath=/usr/pkg/lib endif ifeq "$(TARGET_OS)" "openbsd" DSOSUFFIX = so endif CFLAGS_DEV = CFLAGS_ABI = CFLAGS_OPT = -O2 -g CFLAGS_SANITIZER = CFLAGS += -I$(PCP_INC_DIR)/.. -I$(PCP_INC_DIR) \ -DPCP_VERSION=\"$(PCP_VERSION)\" \ $(PCFLAGS) $(LCFLAGS) $(WARN_OFF) $(CFLAGS_OPT) $(CFLAGS_SANITIZER) $(CFLAGS_DEV) PIECFLAGS = -fPIE PIELDFLAGS = -pie -Wl,-z,relro -Wl,-z,now INVISIBILITY = -fvisibility=hidden # hide shared library symbols AVAHICFLAGS = -D_REENTRANT LZMACFLAGS = LIBUVCFLAGS = OPENSSLCFLAGS = SASLCFLAGS = CMOCKACFLAGS = LDFLAGS += $(PLDFLAGS) $(WARN_OFF) $(PCP_LIBS) $(LLDFLAGS) SRCFILES = GNUmakefile $(HFILES) $(CFILES) $(CXXFILES) $(MFILES) \ $(LSRCFILES) $(LFILES) $(YFILES) $(PYFILES) GPERFTOOLS_LIBS = # tcmalloc of gperftools must be linked last LDLIBS = $(LLDLIBS) $(PLDLIBS) $(GPERFTOOLS_LIBS) MAKEOPTS = --no-print-directory ifdef PROJECT QTDIRDIRT = build debug release .obj .ui .moc .qrc *.xcodeproj *.app QTDIRT = *.a *.o ui_* moc_* qrc_* Info.plist Makefile* object_script.* \ .qmake.stash endif DEPDIRT = dep dep.bak MANDIRT = *.[1-9].gz *.[1-9].bz2 *.[1-9].lzma *.[1-9].xz *.[1-9].tmp LIBDIRT = $(LIBTARGET) $(STATICLIBTARGET) CDIRT = $(OBJECTS) $(CMDTARGET) $(CXXMDTARGET) DIRT = $(LDIRT) $(DEPDIRT) $(MANDIRT) $(QTDIRT) $(CDIRT) $(LIBDIRT) DIRDIRT = $(LDIRDIRT) $(QTDIRDIRT) OBJECTS = $(ASFILES:.s=.o) \ $(CFILES:.c=.o) \ $(CXXFILES:.cxx=.o) \ $(FFILES:.f=.o) \ $(LFILES:.l=.o) \ $(RLFILES:.rl=.o) \ $(YFILES:%.y=%.tab.o) #NB: don't override $(MAKE); gnumake sets it well, propagating -j etc. #MAKE = /usr/bin/gmake AR = /usr/bin/gcc-ar CC = gcc CXX = g++ LD = /usr/bin/ld AWK = /usr/bin/gawk --posix SED = /usr/bin/sed CPP = gcc -E LEX = flex YACC = bison RAGEL = ECHO = /usr/bin/echo LN_S = ln -s GREP = grep GIT = git # man-lint should not break the build (-f) MANLINT = $(TOPDIR)/scripts/man-lint -f PYLINT = /bin/true --rcfile=$(TOPDIR)/.pylintrc --output-format=colorized PYTHON = PYTHON3 = /usr/bin/python3 DTRACE = dtrace ifeq "$(TARGET_OS)" "freebsd" QMAKE = /usr/lib64/qt5/bin/qmake else QMAKE = QT_SELECT=5 /usr/lib64/qt5/bin/qmake endif INSTALL_SH = $(PCP_BINADM_DIR)/install-sh INSTALL = $(INSTALL_SH) -o $(PCP_USER_INSTALL) -g $(PCP_GROUP_INSTALL) CCF = $(CC) $(CFLAGS) CXXF = $(CXX) $(CFLAGS) $(CXXFLAGS) # NB: don't use $(MAKEF), since that suppresses gnumake's subdir parallelization #MAKEF = $(MAKE) $(MAKEOPTS) LDF = $(LD) $(LDFLAGS) MAKEDEPEND = /usr/bin/true ifeq "$(TARGET_OS)" "freebsd" # gmake on FreeBSD has a strange default rule that passes insufficient # flags to cc/ld for the link step. This change prevents errors like # undefined reference to `__stack_chk_fail_local' # LDFLAGS += $(CFLAGS) endif ZIP = /usr/bin/gzip BZIP2 = /usr/bin/bzip2 LZMA = /usr/freeware/bin/lzma XZ = /usr/bin/xz TAR = /usr/bin/gtar RPMPROG = /usr/bin/rpmbuild HDIUTIL = MKINSTALLP = DLLTOOL = RPMBUILD= /usr/bin/rpmbuild RPM = /usr/bin/rpm POD2MAN = /usr/bin/pod2man DPKG = MAKEPKG = GENPMDA = $(PCP_BIN_DIR)/genpmda PKGMK = MD5SUM = /usr/bin/md5sum INKSCAPE = CLANG = /usr/bin/clang LLVM_STRIP = /usr/bin/llvm-strip BPFTOOL = $(TOPDIR)/vendor/github.com/libbpf/bpftool/src/bpftool PMDABPF_ARCH = x86 PMDABPF_VMLINUXH = /builddir/build/BUILD/pcp-6.3.7/vendor/github.com/iovisor/bcc/libbpf-tools/x86/vmlinux.h PMDABPF_MODULES = biolatency.so runqlat.so mountsnoop.so oomkill.so bashreadline.so biolatency.so execsnoop.so exitsnoop.so fsslower.so opensnoop.so runqlat.so statsnoop.so tcpconnect.so tcpconnlat.so vfsstat.so biosnoop.so netatop.so HAVE_MANPAGES = true HAVE_GZIPPED_MANPAGES = true HAVE_BZIP2ED_MANPAGES = false HAVE_LZMAED_MANPAGES = false HAVE_XZED_MANPAGES = false PCP_PREFIX = /usr PCP_MAN_DIR = /usr/share/man PCP_HTML_DIR = /usr/share/doc/pcp-doc/html PCP_ICONS_DIR = /usr/share/pcp-gui/pixmaps PCP_DESKTOP_DIR = /usr/share/applications PCP_PMNS_DIR = /var/lib/pcp/pmns PCP_PMNSADM_DIR = /usr/libexec/pcp/pmns PCP_SELINUX_DIR = /usr/share/selinux PCP_BASHSHARE_DIR = /usr/share/bash-completion NEED_OLD_TBL_HEADER = false RDYNAMIC_FLAG = -rdynamic QT_RELEASE = release QT_VERSION = 5 CLANG_MAJOR_VERSION = 19 # configuration state affecting the entire build ENABLE_SHARED = false ENABLE_SECURE = true ENABLE_PROBES = true ENABLE_AVAHI = true ENABLE_DSTAT = true ENABLE_QT = true ENABLE_QT3D = false ENABLE_PYTHON2 = false ENABLE_PYTHON3 = true ENABLE_SYSTEMD = true ENABLE_SELINUX = true ENABLE_DECOMPRESSION = true ENABLE_LZMA = true # for code supporting any modern version of perl HAVE_PERL = true # for code supporting both/either python2 and/or python3 HAVE_PYTHON = true # python dependent bits HAVE_PYTHON_SIX = true HAVE_PYTHON_REQUESTS = true HAVE_PYTHON_SETUPTOOLS = true HAVE_PYTHON_JSONPOINTER = true HAVE_PYTHON_ORDEREDDICT = true HAVE_PYTHON_INFLUXDB = true HAVE_PYTHON_OPENPYXL = false HAVE_PYTHON_PYARROW = false HAVE_PYTHON_BPF = false # for desktop icons in a variety of img sizes HAVE_HICOLOR_ICONS = true # additional libraries needed for particular functions LIB_FOR_ATOMIC = LIB_FOR_AVAHI = -lavahi-common -lavahi-client LIB_FOR_BASENAME = LIB_FOR_CHAN = -lchan LIB_FOR_CURSES = LIB_FOR_DLOPEN = LIB_FOR_HDR_HISTOGRAM = -lz -lhdr_histogram LIB_FOR_LZMA = -llzma LIB_FOR_MATH = -lm LIB_FOR_PTHREADS = LIB_FOR_READLINE = -lreadline LIB_FOR_REGEX = LIB_FOR_RT = LIB_FOR_BACKTRACE = HAVE_LIBUV = true LIB_FOR_LIBUV = -luv HAVE_LIBINIH = false LIB_FOR_INIH = HAVE_LIBBPF = true LIBBPF_VERSION = 1.5.0 LIB_FOR_LIBBPF = -lbpf HAVE_LIBELF = true LIB_FOR_LIBELF = -lelf HAVE_NCURSES = true LIB_FOR_NCURSES = -lncurses -ltinfo HAVE_NCURSESW = true LIB_FOR_NCURSESW = -lncursesw -ltinfo HAVE_DEVMAPPER = true LIB_FOR_DEVMAPPER = -ldevmapper HAVE_CMOCKA = false LIB_FOR_CMOCKA = HAVE_SASL = true LIB_FOR_LIBSASL2 = -lsasl2 HAVE_OPENSSL = true LIB_FOR_OPENSSL = -lssl -lcrypto HAVE_ZLIB = true LIB_FOR_ZLIB = -lz HAVE_LIBDRM = @HAVE_LIBDRM@ LIB_FOR_LIBDRM = CFLAGS_FOR_LIBDRM = HAVE_LIBDRM_AMDGPU = @HAVE_LIBDRM_AMDGPU@ LIB_FOR_LIBDRM_AMDGPU = CFLAGS_FOR_LIBDRM_AMDGPU = # configuration state for optional performance domains SYSTEMD_CFLAGS = SYSTEMD_LIBS = -lsystemd PFM_LIBS = -lpfm IB_LIBS = -libmad -libumad PMDA_BCC = true PMDA_BPF = true PMDA_BPFTRACE = true PMDA_JSON = true PMDA_GFS2 = true PMDA_STATSD = true PMDA_LIBVIRT = true PMDA_SYSTEMD = true PMDA_PERFEVENT = true PMDA_INFINIBAND = true PMDA_OPENMETRICS = true PMDA_ELASTICSEARCH = true PMDA_MYSQL = true PMDA_ORACLE = true PMDA_MONGODB = true PMDA_POSTGRESQL = true PMDA_SNMP = true PMDA_NGINX = true PMDA_ACTIVEMQ = true PMDA_POSTFIX = true PMDA_BIND2 = true PMDA_NUTCRACKER = false PMDA_LIO = true PMDA_MSSQL = true PMDA_RESCTRL = true PMDA_AMDGPU = false SHELL = /bin/sh IMAGES_DIR = $(TOPDIR)/all-images DIST_DIR = $(TOPDIR)/dist # env vars to be set before you can run a PCP binary in the build # environment ... needed for tools like newhelp # # default, then special case for different platforms # RUN_IN_BUILD_ENV = PCP_CONF=$(TOPDIR)/src/include/pcp.conf PCP_ALT_CPP=$(TOPDIR)/src/pmcpp/pmcpp.static$(EXECSUFFIX) # when cross-compiling, we cannot use RUN_IN_BUILD_ENV, so any binaries # from PCP we need in the build must be installed on the build machine. # ifeq "$(CROSS_COMPILING)" "yes" NEWHELP = . $$PCP_DIR/etc/pcp.conf && $$PCP_BINADM_DIR/newhelp PMIECONF = . $$PCP_DIR/etc/pcp.conf && $$PCP_BIN_DIR/pmieconf PMGENMAP = . $$PCP_DIR/etc/pcp.conf && $$PCP_BIN_DIR/pmgenmap PMCPP = . $$PCP_DIR/etc/pcp.conf && $$PCP_BINADM_DIR/pmcpp else NEWHELP = $(RUN_IN_BUILD_ENV) $(TOPDIR)/src/newhelp/newhelp.static$(EXECSUFFIX) PMIECONF = $(RUN_IN_BUILD_ENV) $(TOPDIR)/src/pmieconf/pmieconf.static$(EXECSUFFIX) PMGENMAP = $(RUN_IN_BUILD_ENV) sh ./pmgenmap.sh PMCPP = $(RUN_IN_BUILD_ENV) $(TOPDIR)/src/pmcpp/pmcpp.static$(EXECSUFFIX) endif SUBDIRS_MAKERULE = \ +for d in `echo $^ `; do \ if test -d "$$d" -a -f "$$d/GNUmakefile"; then \ $(ECHO) === $$d ===; \ $(MAKE) $(MAKEOPTS) -C $$d $@ || exit $$?; \ fi; \ done # special variant of SUBDIRS_MAKERULE when running QA # QA_SUBDIRS_MAKERULE = \ +@for d in `echo $^ `; do \ if test -d "$$d" ; then \ if test -f "$$d/GNUmakefile.install"; then \ $(MAKE) --silent -C $$d -f GNUmakefile.install $@ || exit $$?; \ else \ $(MAKE) --silent -C $$d $@ || exit $$?; \ fi; \ fi; \ done # prepare symbols file for the GNU toolchain (linker) for DSO PMDAs VERSION_SCRIPT_MAKERULE = \ @rm -f $@; \ echo "$(DOMAIN) {" >$@; \ echo " global: $(PMDAINIT);" >>$@; \ echo " local: *;" >>$@; \ echo "};" >>$@; \ # prepare symbols file for other platforms toolchain for shared libs # (convert one canonical format - GNU toolchain style - into others) ifeq "$(TARGET_OS)" "solaris" EXPORTS_MAKERULE = \ $(AWK) <$< >$@ '\ BEGIN { print "$$mapfile_version 2"; print } \ /\{$$/ { print "SYMBOL_VERSION", $$0; next } \ { print }' else EXPORTS_MAKERULE = endif # prepare domain.h used during the PMDA build process for each PMDA DOMAIN_MAKERULE = \ @rm -f $@; \ echo "/*" >$@; \ echo " * built from $<" >>$@; \ echo " */" >>$@; \ $(AWK) <$< '\ $$1=="\#define" && $$2 == "$(DOMAIN)" {\ print "\#define $(DOMAIN) " $$3 >>"$@"; found++ \ }\ END {\ if (found == 0) { \ print "Botch: no define for domain $(DOMAIN) in $<"; \ system("rm '$@'"); \ exit(1) \ }\ if (found > 1) { \ print "Botch: multiple defines for domain $(DOMAIN) in $<";\ print "... see $@ for details"; \ system("rm '$@'"); \ exit(1) \ }\ exit(0) \ }' || ( rm -f $@ && false ) DOMAIN_PERLRULE = \ @export perldomain=`sed -n \ -e '/PCP::PMDA->new/s/[^0-9]*$$//' \ -e '/PCP::PMDA->new/s/^[^0-9]*//p' pmda$(IAM).pl | \ $(AWK) '{ print $$NF }'`; \ $(AWK) <$< '\ BEGIN {\ domain = toupper("$(IAM)") \ }\ $$1=="\#define" && $$2 == domain { \ pmd=$$3; found++ \ }\ END {\ if (found == 0) {\ print "Botch: no define for domain " domain " in $<"; \ exit(1) \ }\ if (found > 1) {\ print "Botch: multiple defines of domain " domain " in $<";\ exit(1) \ }\ if (pmd != "'"$$perldomain"'") {\ print "Botch: domain number in ../../pmns/stdpmid (" pmd ") does not match domain number in Perl source ("'"$$perldomain"'")"; \ exit(1) \ }\ exit(0) \ }' DOMAIN_PYTHONRULE = \ @export pythondomain=`sed -n \ -e '/PMDA(/s/[^0-9]*$$//' \ -e '/PMDA(/s/^[^0-9]*//p' $(PYSCRIPT) | \ $(AWK) '{ print $$NF }'`; \ $(AWK) <$< '\ BEGIN {\ domain = toupper("$(IAM)") \ }\ $$1=="\#define" && $$2 == domain { \ pmd=$$3; found++ \ }\ END {\ if (found == 0) {\ print "Botch: no define for domain " domain " in $<"; \ exit(1) \ }\ if (found > 1) {\ print "Botch: multiple defines of domain " domain " in $<";\ exit(1) \ }\ if (pmd != "'"$$pythondomain"'") {\ print "Botch: domain number in ../../pmns/stdpmid (" pmd ") does not match domain number in Python source ("'"$$pythondomain"'")"; \ exit(1) \ }\ exit(0) \ }' POD_OPTIONS = --section=$(MAN_SECTION) --release=$(PCP_VERSION) \ --center="Performance Co-Pilot" --date="Performance Co-Pilot" POD_MAKERULE = $(POD2MAN) $(POD_OPTIONS) $^ $@ ifeq "$(TARGET_OS)" "mingw" INSTALL_MAN = else INSTALL_MAN = \ test -z "$$MAN_PAGES" && MAN_PAGES="$(MAN_PAGES)"; \ if [ "$(HAVE_MANPAGES)" = "true" ] ; then \ for d in `echo $$MAN_PAGES`; do \ first=true; \ base=`echo $$d | sed -e 's/\.[0-9]//g'`; \ section=`echo $$d | sed -e 's/.*\.//g'`; \ $(AWK) <$$d ' \ BEGIN { state=0 } \ $$1==".ds" && $$2=="xM" { print $$3; next } \ $$1==".ds" { ds["\\\\\\*\\("$$2] = $$3 } \ $$1==".SH" && $$2=="NAME" { state=1; next } \ $$1==".SH" && state==1 { exit } \ /^\./ { next } \ state==1 { for (i=1;i<=NF;i++) { \ if ($$i=="\\-" || $$i=="-") exit; \ gsub ("\\\\f3", "", $$i); gsub ("\\\\f1.*", "", $$i); \ for ( d in ds ) sub (d, ds[d], $$i); \ print $$i \ } \ }' \ | while read m; do \ [ -z "$$m" -o "$$m" = "\\" ] && continue; \ t=$(PCP_MAN_DIR)/man$$section/$$m.$$section; \ if $$first; then \ _tfx= ;\ if $(NEED_OLD_TBL_HEADER) ; then \ $(SED) -e "1s/^'\\\\\"! tbl.*/'\\\\\" t/" $$d > $$d.tmp; _tfx=.tmp; \ fi; \ if $(HAVE_GZIPPED_MANPAGES) ; then \ $(ZIP) -c $$d$$_tfx > $$d.gz; _tfx=.gz; _sfx=.gz; \ fi; \ if $(HAVE_BZIP2ED_MANPAGES) ; then \ $(BZIP2) -c $$d$$_tfx > $$d.bz2; _tfx=.bz2; _sfx=.bz2; \ fi; \ if $(HAVE_LZMAED_MANPAGES) ; then \ $(LZMA) -c $$d$$_tfx > $$d.lzma; _tfx=.lzma; _sfx=.lzma; \ fi; \ if $(HAVE_XZED_MANPAGES) ; then \ $(XZ) -c $$d$$_tfx > $$d.xz; _tfx=.xz; _sfx=.xz; \ fi; \ u=$$m.$$section$$_sfx; \ echo $(INSTALL) -m 644 $${d}$$_tfx $${t}$$_sfx; \ $(INSTALL) -m 644 $${d}$$_tfx $${t}$$_sfx; \ else \ echo $(INSTALL) -S $$u $${t}$$_sfx; \ $(INSTALL) -S $$u $${t}$$_sfx; \ fi; \ first=false; \ done; \ done; \ fi endif MANPAGE_SUFFIX = _sfx=.gz; \ $(HAVE_BZIP2ED_MANPAGES) && _sfx=.bz2; \ $(HAVE_LZMAED_MANPAGES) && _sfx=.lzma; \ $(HAVE_XZED_MANPAGES) && _sfx=.xz; \ PERL_INSTALL_BASE = /usr PERL_INSTALLDIRS = vendor # MakeMaker INSTALL_BASE needs to be unset for proper vendor_perl paths to be used for --prefix=/usr; ifeq "$(PERL_INSTALL_BASE)" "/usr" ifneq "$(TARGET_OS)" "darwin" MAKEMAKER_EXTRA_OPTIONS= else MAKEMAKER_EXTRA_OPTIONS=INSTALL_BASE=$(PERL_INSTALL_BASE) INSTALLBASE=$(PERL_INSTALL_BASE) endif else MAKEMAKER_EXTRA_OPTIONS=INSTALL_BASE=$(PERL_INSTALL_BASE) INSTALLBASE=$(PERL_INSTALL_BASE) endif PERL_MAKE_MAKEFILE = \ export PCP_TOPDIR="`cd $(TOPDIR) && pwd`"; \ TARGET_OS="$(TARGET_OS)" CC="$(CC) $(CFLAGS_ABI)" perl Makefile.PL $(MAKEMAKER_EXTRA_OPTIONS) $(MAKEMAKER_OPTIONS) # Collect files from a Perl "make -f Makefile install" below # src/perl to build the PCP Perl packaging list, and also clean up # the installed files to remove unwanted files and make the DSO # executable # # Usage is $(call PERL_GET_FILELIST,target,listfile,base) # where target is the Makefile target (install or install_perl), # listfile is something like $(TOPDIR)/perl-pcp-pmda.list and # base is the DSO basename like PMDA. # # We need different versions for the different installation and # packaging regimes. # ifeq "$(PACKAGE_DISTRIBUTION)" "debian" # For Debian packaging, this is not needed PERL_GET_FILELIST = else ifeq "$(PACKAGE_DISTRIBUTION)" "gentoo" # Gentoo cannot rely on the .packlist files from the install, so create # a temporary pack.list file PERL_GET_FILELIST = \ $(PERLMAKE) -f Makefile $(1) DESTDIR="$$DIST_ROOT" \ | tee pack.list; \ sed -n -e '/\.bs$$/d' -e 's/\.[0-9]pm$$/&.gz/' -e "s@^Installing $$DIST_ROOT@@p" <pack.list >$(2) || exit 1; \ if [ -s $(2) ]; then rm -f pack.list; \ else echo "Arrgh ... no files to include in package via $(2), see pack.list"; exit 1; \ fi; \ find "$$DIST_ROOT/$(PERL_INSTALL_BASE)" -name perllocal.pod -exec rm -f '{}' ';' ; \ find "$$DIST_ROOT/$(PERL_INSTALL_BASE)" -name \*.bs -exec rm -f '{}' ';' ; \ find "$$DIST_ROOT/$(PERL_INSTALL_BASE)" -name $(3).so -exec chmod 755 '{}' ';' else ifeq "$(PACKAGE_DISTRIBUTION)" "freebsd" # FreeBSD Perl packaging is a broken mystery at this point in time # 1. there is no .packlist files being created # 2. $(PERLMAKE) -f Makefile install DESTDIR=$$DIST_ROOT does not work # so disable the packaging pro tem PERL_GET_FILELIST = else # Everyone else ... includes the RPM-based packaging platforms ifeq "$(PACKAGE_DISTRIBUTION)" "mandriva" man_suffix=lzma else man_suffix=gz endif PERL_GET_FILELIST = \ $(PERLMAKE) -f Makefile $(1) DESTDIR="$$DIST_ROOT"; \ find "$$DIST_ROOT/$(PERL_INSTALL_BASE)" -name .packlist -exec mv '{}' $(2) ';' ; \ if [ -s $(2) ] ; then \ $(MANPAGE_SUFFIX) \ if [ "$(HAVE_MANPAGES)" = "false" ] ; then \ sed -e '/.*man[1-9].*/d' -e '/.*3pm.*/d' $(2) >$(2).tmp; \ mv $(2).tmp $(2); \ find "$$DIST_ROOT/$(PERL_INSTALL_BASE)" -name "*3pm*" -exec rm -rf '{}' ';' ; \ fi ;\ sed -n -e '/\.bs$$/d' -e 's/\.[0-9]pm$$/&'"$$_sfx/" -e "s@^$$DIST_ROOT@@p" $(2) >$(2).tmp; \ mv $(2).tmp $(2); \ else echo "Arrgh ... no files to include in package via $(2)"; exit 1; \ fi; \ find "$$DIST_ROOT/$(PERL_INSTALL_BASE)" -name perllocal.pod -exec rm -f '{}' ';' ; \ find "$$DIST_ROOT/$(PERL_INSTALL_BASE)" -name \*.bs -exec rm -f '{}' ';' ; \ find "$$DIST_ROOT/$(PERL_INSTALL_BASE)" -name $(3).so -exec chmod 755 '{}' ';' endif endif endif # Create perl manifest files explicitly for some distributions ifeq "$(shell [ '$(PACKAGE_DISTRIBUTION)' = cocoa \ -o '$(PACKAGE_DISTRIBUTION)' = macosx \ -o '$(PACKAGE_DISTRIBUTION)' = gentoo \ -o '$(PACKAGE_DISTRIBUTION)' = solaris \ -o '$(PACKAGE_DISTRIBUTION)' = freebsd \ -o '$(PACKAGE_DISTRIBUTION)' = openbsd \ ] && echo 1)" "1" # Gather installed Perl files before packaging PERL_INSTALL = \ if [ -n "$(DIST_MANIFEST)" ]; then \ if [ "`echo $(TOPDIR)/perl-pcp-*.list`" != "$(TOPDIR)/perl-pcp-*.list" ]; then \ cat $(TOPDIR)/perl-pcp-*.list | while read f; do \ bn=`basename $$f .gz`; \ dn=`dirname $$f`; \ $(INSTALL) -d $$dn || exit 1; \ src=`find */blib -name $$bn`; \ if [ -x $$src ] ; then mode=0755; else mode=0644; fi; \ $(INSTALL) -m $$mode $$src $$dn/$$bn || exit 1; \ done; \ fi; \ fi else PERL_INSTALL = endif # # Python platform-specific installation quirks PYTHON_PREFIX=/usr SETUP_PY_BUILD_OPTIONS = --include-dirs=$(TOPDIR)/src/include:$(TOPDIR)/src/include/pcp$(EXTRA_PY_INCLUDES) SETUP_PY_BUILD_OPTIONS += --library-dirs=$(TOPDIR)/src/libpcp/src:$(TOPDIR)/src/libpcp_pmda/src:$(TOPDIR)/src/libpcp_gui/src:$(TOPDIR)/src/libpcp_import/src:$(TOPDIR)/src/libpcp_mmv/src SETUP_PY_INSTALL_OPTIONS = --skip-build SETUP_PY_INSTALL_OPTIONS += --root="$${DIST_ROOT:-/}" ifeq "$(PYTHON_PREFIX)" "/usr" ifeq "$(PACKAGE_DISTRIBUTION)" "debian" SETUP_PY_INSTALL_OPTIONS += --install-layout=deb endif else SETUP_PY_INSTALL_OPTIONS += --prefix=$(PYTHON_PREFIX) endif ifeq "$(ENABLE_PYTHON3)" "true" SETUP_PY_BUILD_OPTIONS += -DENABLE_PYTHON3 endif # RPM byte-compiles and installs results in our DIST_ROOT, cater for this: ifeq "$(shell [ '$(TARGET_OS)' = linux -a '$(PACKAGE_DISTRIBUTION)' != gentoo \ ] && echo 1)" "1" # Linux and not Gentoo (which needs tarball packaging) PYTHON_INSTALL = \ cat $(TOPDIR)/python-pcp.list | while read f; do \ dirname $$f | $(SED) -e '/.*packages$$/d'; \ done | $(PCP_SORT_PROG) -u > $(TOPDIR)/python-pcp.list.rpm; \ $(AWK) '{print} /\.pyc$$/ {sub(/\.pyc$$/,".pyo"); print}' \ < $(TOPDIR)/python-pcp.list >> $(TOPDIR)/python-pcp.list.rpm; \ cat $(TOPDIR)/python-pcp.list.rpm | while read f; do \ touch "$${DIST_ROOT-/}$$f"; \ done PYTHON3_INSTALL = \ cat $(TOPDIR)/python3-pcp.list | while read f; do \ dirname $$f | $(SED) -e '/.*packages$$/d'; \ done | $(PCP_SORT_PROG) -u > $(TOPDIR)/python3-pcp.list.rpm; \ $(AWK) '{print} /\.pyc$$/ {sub(/\.pyc$$/,".pyo"); print}' \ < $(TOPDIR)/python3-pcp.list >> $(TOPDIR)/python3-pcp.list.rpm; \ $(AWK) '/\.pyc$$/ {sub(/\.pyc$$/,".opt-1.pyc"); print}' \ < $(TOPDIR)/python3-pcp.list >> $(TOPDIR)/python3-pcp.list.rpm; \ cat $(TOPDIR)/python3-pcp.list.rpm | while read f; do \ touch "$${DIST_ROOT-/}$$f"; \ done else ifeq "$(shell [ '$(PACKAGE_DISTRIBUTION)' = cocoa \ -o '$(PACKAGE_DISTRIBUTION)' = macosx \ -o '$(PACKAGE_DISTRIBUTION)' = gentoo \ -o '$(PACKAGE_DISTRIBUTION)' = solaris \ -o '$(PACKAGE_DISTRIBUTION)' = freebsd \ ] && echo 1)" "1" # Gather installed Python files before packaging # Lines in python-pcp.list are like this # /usr/lib/python2.7/site-packages/pcp.py # /usr/lib/python2.7/site-packages/pcp.pyc # /usr/lib/python2.7/site-packages/pmapi.so # /usr/lib/python2.7/site-packages/pcp-0.2-py2.7.egg-info # # Matching build artifacts are below src/python/build # PYTHON_INSTALL = \ if [ -n "$(DIST_MANIFEST)" ]; then \ cat $(TOPDIR)/python-pcp.list \ | while read f; do \ bn=`basename $$f`; \ dn=`dirname $$f`; \ pydir="$(TOPDIR)/src/python"; \ $(INSTALL) -d $$dn || exit 1; \ for src in `find $$pydir/build $$pydir/pcp.egg-info -name $$bn`; do \ $(INSTALL) $$src $$f || exit 1; \ done; \ done; \ fi PYTHON3_INSTALL = \ if [ -n "$(DIST_MANIFEST)" ]; then \ cat $(TOPDIR)/python3-pcp.list \ | while read f; do \ bn=`basename $$f`; \ dn=`dirname $$f`; \ pydir="$(TOPDIR)/src/python"; \ $(INSTALL) -d $$dn || exit 1; \ for src in `find $$pydir/build $$pydir/pcp.egg-info -name $$bn`; do \ $(INSTALL) $$src $$f || exit 1; \ done; \ done; \ fi else ifeq "$(shell [ '$(PACKAGE_DISTRIBUTION)' = openbsd \ ] && echo 1)" "1" # similar to above, but files already installed in DIST_ROOT so # just append to the manifest PYTHON_INSTALL = \ if [ -n "$(DIST_MANIFEST)" ]; then \ cat $(TOPDIR)/python-pcp.list \ | while read f; do \ bn=`basename $$f`; \ dn=`dirname $$f`; \ $(INSTALL) -d $$dn || exit 1; \ src=`find "$(DIST_ROOT)/usr/lib" -name $$bn`; \ $(INSTALL) $$src $$f || exit 1; \ done; \ fi PYTHON3_INSTALL = \ if [ -n "$(DIST_MANIFEST)" ]; then \ cat $(TOPDIR)/python3-pcp.list \ | while read f; do \ bn=`basename $$f`; \ dn=`dirname $$f`; \ $(INSTALL) -d $$dn || exit 1; \ src=`find "$(DIST_ROOT)/usr/lib" -name $$bn`; \ $(INSTALL) $$src $$f || exit 1; \ done; \ fi else # default case if all of the above tests fail PYTHON_INSTALL = endif # openbsd if endif # cocoa ... freebsd if endif # linux && !gentoo if # Linux and Unix platforms: ifeq "$(findstring $(PCP_PLATFORM),darwin mingw)" "" BINARY = build/$(QT_RELEASE)/$(COMMAND) LNMAKE = test ! -f $(BINARY) -o -L $(COMMAND) || ( rm -f $(COMMAND) && $(LN_S) $(BINARY) $(COMMAND) ) WINDOW = x11 # qmake botches the order of the -L arguments in the generated $(LIBS) # in the Makefile ... need to get the Qt libraries dir (begins with a /) # out from the head of the list and insert it before the first -l argument # (or the end of the list). # So, for example # LIBS = $(SUBLIBS) -L/usr/lib -L../libpcp/src -L../libpcp_qmc/src ... -lpcp_qmc ... # becomes # LIBS = $(SUBLIBS) -L../libpcp/src -L../libpcp_qmc/src ... -L/usr/lib -lpcp_qmc ... # QTFIX = sed -e 's/Makefile.new/Makefile/g' <Makefile.new | $(AWK) '$$1 == "LIBS" { printf $$1; for (i=2;i<=NF;i++) { if ($$i~/^-L\//) { save=save " " $$i; continue } else if (save!="" && $$i~/^-l/) { printf " %s",save; save="" } printf " %s",$$i } if (save!="") printf " %s",save; print ""; next } { print }' >Makefile.fix # # Qt magic for build/installs across all the supported platforms # because qmake does not always get it right, e.g. omitting -fPIC for # static libraries in Qt5 on Ubuntu x86_64, we need to push our CFLAGS, CXXFLAGS # (usually empty) and LDFLAGS down # QTMAKE = rm -f Makefile.new Makefile.fix; export CC='$(CC)'; export CXX='$(CXX)'; CFLAGS='$(CFLAGS)' CXXFLAGS='$(CXXFLAGS)' LDFLAGS='$(LDFLAGS)' $(QMAKE) -o Makefile.new CONFIG+=$(QT_RELEASE) && $(QTFIX) && ( if [ -f Makefile ]; then if diff Makefile Makefile.fix >/dev/null; then :; else rm -f Makefile; mv Makefile.fix Makefile; fi; else mv Makefile.fix Makefile; fi ); rm -f Makefile.new Makefile.fix; $(MAKE) $(MAKEOPTS) -f Makefile else # Windows and Mac platforms: QTMAKE = CFLAGS='$(CFLAGS)' CXXFLAGS='$(CXXFLAGS)' LDFLAGS='$(LDFLAGS)' $(QMAKE) CONFIG+=$(QT_RELEASE) && $(MAKE) $(MAKEOPTS) -f Makefile ifeq ($(PCP_PLATFORM),darwin) MACBUILD = build/$(QT_RELEASE)/$(COMMAND).app/Contents BINARY = $(MACBUILD)/MacOS/$(COMMAND) LNMAKE = test ! -f $(BINARY) -o -L $(COMMAND) || ( rm -f $(COMMAND) && $(LN_S) $(BINARY) $(COMMAND) ) WINDOW = mac endif ifeq ($(PCP_PLATFORM),mingw) BINARY = build/$(QT_RELEASE)/$(COMMAND)$(EXECSUFFIX) LNMAKE = WINDOW = win endif endif ifeq ($(PCP_PLATFORM),darwin) INSTALL_DIRECTORY_HIERARCHY=\ d=$(1); while [ "$$d" != "$(2)" -a "$$d" != "/" -a "$$d" != "." ] ; do \ echo $$d; d=`dirname $$d`; done | sort | while read id; do \ $(INSTALL) -m 755 -d $$id || exit 1; done INSTALL_QT_RESOURCES=\ printf "[Paths]\nPlugins=/Library/PCP/Plugins\n\n" > qt.conf; \ $(INSTALL) -m 644 qt.conf $(1)/qt.conf; \ rm qt.conf; \ find frameworks -type d -name qt_menu.nib | while read nib; do \ $(INSTALL) -m 755 -d $(1)/qt_menu.nib || exit 1; \ find $$nib -type f | while read nibs; do \ f=`basename $$nibs`; \ $(INSTALL) -m 644 $$nibs $(1)/qt_menu.nib/$$f || exit 1; \ done; \ done MAC_APPSUPPORT_DIR=/Library/PCP MAC_FRAMEWORKS_DIR=$(MAC_APPSUPPORT_DIR)/Frameworks # WARNING! # This rule modified the binary it was given, once modified the # binary cannot be used with this rule again. # If the binary is installed then it's important to call this # rule before calling install rule for the binary. INSTALL_QT_FRAMEWORKS=\ otool -L $(1) | awk '{if (NR != 1) {print $$1}}' |\ grep -E 'Qt.*\.framework' | while read qt; do \ tdir=`dirname $$qt`; \ install_name_tool -change $$qt $(MAC_FRAMEWORKS_DIR)/$$qt $(1);\ $(call INSTALL_DIRECTORY_HIERARCHY,$(MAC_FRAMEWORKS_DIR)/$$tdir,/Library/PCP); \ mkdir -p frameworks/$$tdir || exit 1; \ fwqt="frameworks/$$qt"; \ cp /Library/Frameworks/$$qt frameworks/$$qt || exit 1; \ otool -L $$fwqt | awk '{if (NR != 1) {print $$1}}' |\ grep -E 'Qt.*\.framework' | while read dep; do \ install_name_tool -change $$dep $(MAC_FRAMEWORKS_DIR)/$$dep $$fwqt;\ done; \ $(INSTALL) frameworks/$$qt $(MAC_FRAMEWORKS_DIR)/$$qt; \ if [ -d /Library/Frameworks/$$tdir/Resources ] ; then \ $(INSTALL) -d $(MAC_FRAMEWORKS_DIR)/$$tdir/Resources; \ (cd /Library/Frameworks/$$tdir; find Resources -type f) | \ while read rf; do \ rfpath="$$tdir/$$rf"; rfd=`dirname $$rfpath`; \ fwpath="frameworks/$$rfpath"; brfd=`basename $$rfd`; \ mkdir -p frameworks/$$rfd || exit 1; \ cp /Library/Frameworks/$$rfpath $$fwpath || exit 1; \ [ $$brfd != qt_menu.nib ] || continue; \ $(INSTALL) -d $(MAC_FRAMEWORKS_DIR)/$$rfd || exit 1; \ $(INSTALL) $$fwpath $(MAC_FRAMEWORKS_DIR)/$$rfpath;\ done \ fi; done endif # For targets that should always be rebuilt, # define a target that is never up-to-date. # Targets needing this should depend on $(_FORCE) _FORCE = __force_build PCP_USER = pcp PCP_GROUP = pcp PCP_USER_INSTALL = root PCP_GROUP_INSTALL = root # systemd service type for logutil scripts SD_SERVICE_TYPE=exec PCPLIB = -lpcp PCPLIB_EXTRAS = $(LIB_FOR_MATH) $(LIB_FOR_PTHREADS) $(LIB_FOR_DLOPEN) $(LIB_FOR_RT) ifneq "$(PCPLIB)" "$(LIB_FOR_BASENAME)" PCPLIB_EXTRAS += $(LIB_FOR_BASENAME) endif ifeq "$(ENABLE_SHARED)" "no" PCPLIB += $(PCPLIB_EXTRAS) endif PCP_GUILIB = -lpcp_gui $(PCPLIB) PCP_PMDALIB = -lpcp_pmda $(PCPLIB) PCP_TRACELIB = -lpcp_trace $(PCPLIB) PCP_MMVLIB = -lpcp_mmv $(PCPLIB) PCPWEBLIB_EXTRAS = $(LIB_FOR_LIBSASL2) $(LIB_FOR_OPENSSL) $(LIB_FOR_LIBUV) $(LIB_FOR_LIBINH) $(PCP_PMDALIB) $(PCP_MMVLIB) PCP_WEBLIB = -lpcp_web $(PCPWEBLIB_EXTRAS) PCP_ARCHIVELIB = -lpcp_archive ifdef PCP_ALTLIBS ifeq ($(PCP_LIB_DIR),$(PCP_LIB32_DIR)) PCP_ALTLIBS = else ifneq "$(findstring $(MAKECMDGOALS),clean clobber)" "" PCP_ALTLIBS = endif endif endif # (optional) hook for developer build definitions # -include $(TOPDIR)/src/include/builddefs_dev endif # _BUILDDEFS_INCLUDED_