...

<html>
<head>
<title>pcrestack specification</title>
</head>
<body bgcolor="#FFFFFF" text="#00005A" link="#0066FF" alink="#3399FF" vlink="#2222BB">
<h1>pcrestack man page</h1>

Return to the <a href="index.html">PCRE index page</a>.


This page is part of the PCRE HTML documentation. It was generated automatically
from the original man page. If there is any nonsense in it, please consult the
man page, in case the conversion went wrong.
 
 
PCRE DISCUSSION OF STACK USAGE
 

When you call pcre[16|32]_exec(), it makes use of an internal function
called match(). This calls itself recursively at branch points in the
pattern, in order to remember the state of the match so that it can back up and
try a different alternative if the first one fails. As matching proceeds deeper
and deeper into the tree of possibilities, the recursion depth increases. The
match() function is also called in other circumstances, for example,
whenever a parenthesized sub-pattern is entered, and in certain cases of
repetition.


Not all calls of match() increase the recursion depth; for an item such
as a* it may be called several times at the same level, after matching
different numbers of a's. Furthermore, in a number of cases where the result of
the recursive call would immediately be passed back as the result of the
current call (a "tail recursion"), the function is just restarted instead.


The above comments apply when pcre[16|32]_exec() is run in its normal
interpretive manner. If the pattern was studied with the
PCRE_STUDY_JIT_COMPILE option, and just-in-time compiling was successful, and
the options passed to pcre[16|32]_exec() were not incompatible, the matching
process uses the JIT-compiled code instead of the match() function. In
this case, the memory requirements are handled entirely differently. See the
<a href="pcrejit.html">pcrejit</a>
documentation for details.


The pcre[16|32]_dfa_exec() function operates in an entirely different way,
and uses recursion only when there is a regular expression recursion or
subroutine call in the pattern. This includes the processing of assertion and
"once-only" subpatterns, which are handled like subroutine calls. Normally,
these are never very deep, and the limit on the complexity of
pcre[16|32]_dfa_exec() is controlled by the amount of workspace it is given.
However, it is possible to write patterns with runaway infinite recursions;
such patterns will cause pcre[16|32]_dfa_exec() to run out of stack. At
present, there is no protection against this.


The comments that follow do NOT apply to pcre[16|32]_dfa_exec(); they are
relevant only for pcre[16|32]_exec() without the JIT optimization.

 
Reducing pcre[16|32]_exec()'s stack usage
 

Each time that match() is actually called recursively, it uses memory
from the process stack. For certain kinds of pattern and data, very large
amounts of stack may be needed, despite the recognition of "tail recursion".
You can often reduce the amount of recursion, and therefore the amount of stack
used, by modifying the pattern that is being matched. Consider, for example,
this pattern:
<pre>
 ([^&#60;]|&#60;(?!inet))+
</pre>
It matches from wherever it starts until it encounters "&#60;inet" or the end of
the data, and is the kind of pattern that might be used when processing an XML
file. Each iteration of the outer parentheses matches either one character that
is not "&#60;" or a "&#60;" that is not followed by "inet". However, each time a
parenthesis is processed, a recursion occurs, so this formulation uses a stack
frame for each matched character. For a long string, a lot of stack is
required. Consider now this rewritten pattern, which matches exactly the same
strings:
<pre>
 ([^&#60;]++|&#60;(?!inet))+
</pre>
This uses very much less stack, because runs of characters that do not contain
"&#60;" are "swallowed" in one item inside the parentheses. Recursion happens only
when a "&#60;" character that is not followed by "inet" is encountered (and we
assume this is relatively rare). A possessive quantifier is used to stop any
backtracking into the runs of non-"&#60;" characters, but that is not related to
stack usage.


This example shows that one way of avoiding stack problems when matching long
subject strings is to write repeated parenthesized subpatterns to match more
than one character whenever possible.

 
Compiling PCRE to use heap instead of stack for pcre[16|32]_exec()
 

In environments where stack memory is constrained, you might want to compile
PCRE to use heap memory instead of stack for remembering back-up points when
pcre[16|32]_exec() is running. This makes it run a lot more slowly, however.
Details of how to do this are given in the
<a href="pcrebuild.html">pcrebuild</a>
documentation. When built in this way, instead of using the stack, PCRE obtains
and frees memory by calling the functions that are pointed to by the
pcre[16|32]_stack_malloc and pcre[16|32]_stack_free variables. By
default, these point to malloc() and free(), but you can replace
the pointers to cause PCRE to use your own functions. Since the block sizes are
always the same, and are always freed in reverse order, it may be possible to
implement customized memory handlers that are more efficient than the standard
functions.

 
Limiting pcre[16|32]_exec()'s stack usage
 

You can set limits on the number of times that match() is called, both in
total and recursively. If a limit is exceeded, pcre[16|32]_exec() returns an
error code. Setting suitable limits should prevent it from running out of
stack. The default values of the limits are very large, and unlikely ever to
operate. They can be changed when PCRE is built, and they can also be set when
pcre[16|32]_exec() is called. For details of these interfaces, see the
<a href="pcrebuild.html">pcrebuild</a>
documentation and the
<a href="pcreapi.html#extradata">section on extra data for pcre[16|32]_exec()</a>
in the
<a href="pcreapi.html">pcreapi</a>
documentation.


As a very rough rule of thumb, you should reckon on about 500 bytes per
recursion. Thus, if you want to limit your stack usage to 8Mb, you should set
the limit at 16000 recursions. A 64Mb stack, on the other hand, can support
around 128000 recursions.


In Unix-like environments, the pcretest test program has a command line
option (-S) that can be used to increase the size of its stack. As long
as the stack is large enough, another option (-M) can be used to find the
smallest limits that allow a particular pattern to match a given subject
string. This is done by calling pcre[16|32]_exec() repeatedly with different
limits.

 
Obtaining an estimate of stack usage
 

The actual amount of stack used per recursion can vary quite a lot, depending
on the compiler that was used to build PCRE and the optimization or debugging
options that were set for it. The rule of thumb value of 500 bytes mentioned
above may be larger or smaller than what is actually needed. A better
approximation can be obtained by running this command:
<pre>
 pcretest -m -C
</pre>
The -C option causes pcretest to output information about the
options with which PCRE was compiled. When -m is also given (before
-C), information about stack use is given in a line like this:
<pre>
 Match recursion uses stack: approximate frame size = 640 bytes
</pre>
The value is approximate because some recursions need a bit more (up to perhaps
16 more bytes).


If the above command is given when PCRE is compiled to use the heap instead of
the stack for recursion, the value that is output is the size of each block
that is obtained from the heap.

 
Changing stack size in Unix-like systems
 

In Unix-like environments, there is not often a problem with the stack unless
very long strings are involved, though the default limit on stack size varies
from system to system. Values from 8Mb to 64Mb are common. You can find your
default limit by running the command:
<pre>
 ulimit -s
</pre>
Unfortunately, the effect of running out of stack is often SIGSEGV, though
sometimes a more explicit error message is given. You can normally increase the
limit on stack size by code such as this:
<pre>
 struct rlimit rlim;
 getrlimit(RLIMIT_STACK, &rlim);
 rlim.rlim_cur = 100*1024*1024;
 setrlimit(RLIMIT_STACK, &rlim);
</pre>
This reads the current limits (soft and hard) using getrlimit(), then
attempts to increase the soft limit to 100Mb using setrlimit(). You must
do this before calling pcre[16|32]_exec().

 
Changing stack size in Mac OS X
 

Using setrlimit(), as described above, should also work on Mac OS X. It
is also possible to set a stack size when linking a program. There is a
discussion about stack sizes in Mac OS X at this web site:
<a href="http://developer.apple.com/qa/qa2005/qa1419.html">http://developer.apple.com/qa/qa2005/qa1419.html.</a>

 
AUTHOR
 

Philip Hazel
 
University Computing Service
 
Cambridge CB2 3QH, England.
 

 
REVISION
 

Last updated: 24 June 2012
 
Copyright &copy; 1997-2012 University of Cambridge.
 

Return to the <a href="index.html">PCRE index page</a>.

.	Edit
..	Edit
NON-AUTOTOOLS-BUILD.txt	Edit
README.txt	Edit
index.html	Edit
pcre-config.html	Edit
pcre.html	Edit
pcre16.html	Edit
pcre32.html	Edit
pcre_assign_jit_stack.html	Edit
pcre_compile.html	Edit
pcre_compile2.html	Edit
pcre_config.html	Edit
pcre_copy_named_substring.html	Edit
pcre_copy_substring.html	Edit
pcre_dfa_exec.html	Edit
pcre_exec.html	Edit
pcre_free_study.html	Edit
pcre_free_substring.html	Edit
pcre_free_substring_list.html	Edit
pcre_fullinfo.html	Edit
pcre_get_named_substring.html	Edit
pcre_get_stringnumber.html	Edit
pcre_get_stringtable_entries.html	Edit
pcre_get_substring.html	Edit
pcre_get_substring_list.html	Edit
pcre_jit_exec.html	Edit
pcre_jit_stack_alloc.html	Edit
pcre_jit_stack_free.html	Edit
pcre_maketables.html	Edit
pcre_pattern_to_host_byte_order.html	Edit
pcre_refcount.html	Edit
pcre_study.html	Edit
pcre_utf16_to_host_byte_order.html	Edit
pcre_utf32_to_host_byte_order.html	Edit
pcre_version.html	Edit
pcreapi.html	Edit
pcrebuild.html	Edit
pcrecallout.html	Edit
pcrecompat.html	Edit
pcrecpp.html	Edit
pcredemo.html	Edit
pcregrep.html	Edit
pcrejit.html	Edit
pcrelimits.html	Edit
pcrematching.html	Edit
pcrepartial.html	Edit
pcrepattern.html	Edit
pcreperform.html	Edit
pcreposix.html	Edit
pcreprecompile.html	Edit
pcresample.html	Edit
pcrestack.html	Edit
pcresyntax.html	Edit
pcretest.html	Edit
pcreunicode.html	Edit